10/100 mBit ethernet switch/distributer with optimized programmable switching engine and real-time backup loop

There are 4 configurations:

- 8x 10/100mBit on Neutrik Ethercon

- 6x 10/100mBit on Neutrik Ethercon and 2x 100mBit Fibre Optic onSC connector.

(both versions also available with Power over Ethernet source option on 6 ports)

Features:

- Real-Time backup loop: Create a ring of switches. if a cable/connaction failes, then the signals are directly rerouted (the show can/must go on). a message is displayed in the dmXLAN software

- Multicast filtering: routing of multicast protocols on a port base (example MA-net/ACN/digital audio)

- Artnet Filtering: setup a port to filter the artnet universes. This is usefull for low-bitrate connactions like wireless or 10mBit equipment. The port will only pass thru enabled universes

- Cable testing: if there is a problem in a UTP cable, the switch can test the cable and tell you where the problem is (up to 80cm accurate)